Ostoskori (0)
Standardi

SAE AMS6488H

Kumottu
Esikatsele Esikatselu ei ole saatavilla

Lisää mahdolliset korjaukset ja lisäykset ostoskoriin alta.

Kieli
Toimitustavat

Soveltamisala

This specification covers a low-alloy steel in the form of bars, forgings, and forging stock. These products have been used typically for parts requiring a steel capable of through-hardening to a minimum hardness of 50 HRC in section thicknesses up to 12 inches (305 mm) with relatively high levels of strength, fatigue resistance, ductility, and thermal stability in service from -100 degrees to +1000 degrees F (-73 degrees to +538 degrees C), but usage is not limited to such applications. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; SAE ARP 1110 recommends practices to minimize such conditions.

Julkaisun tiedot

  • Standardi julkaisijalta SAE International
  • Julkaistu:
  • Kumottu:
  • Julkaisutyyppi: IS
  • Pages
  • Publisher SAE International
  • Distributor SAE International

Sidokset

  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: SAE ARP1110
  • Korvaa: SAE AMS6488G
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: SAE MAM2300
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: SAE MAM2251
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: SAE AS1182
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: SAE AMS2310
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: SAE AMS2259
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: SAE AMS2300
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: SAE AMS2251
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: SAE AMS2808