Ostoskori (0)
Huom! Käyttökatkos 1.6.2025
Huom! Tietosuojaselostetta on taas päivitetty Lue lisää
Standardi

IEEE C37.20.2-2015

Enums.Sd.Shared.Models.DocumentStatus.Revised

Standardista on uudempi painos: IEEE C37.20.2-2022

Esikatsele

Lisää mahdolliset korjaukset ja lisäykset ostoskoriin alta.

Kieli
Toimitustavat

Soveltamisala

Revision Standard - Superseded. Metal-clad (MC) medium-voltage switchgear that contains drawout electrically operated circuit breakers is covered. MC switchgear is compartmentalized to isolate components such as instrumentation, main bus, and both incoming and outgoing connections with grounded metal barriers. Rated maximum voltage levels for metal-clad switchgear range from 4.76 kV to 38 kV with main bus continuous current ratings of 1200 A, 2000 A, 3000 A, and 4000 A. MC switchgear also contains associated control, instruments, metering, relaying, protective, and regulating devices, as necessary. Service conditions, ratings, temperature limitations and classification of insulating materials, insulation (dielectric) withstand voltage requirements, test procedures, and applications are discussed.

Julkaisun tiedot

  • Standardi julkaisijalta IEEE
  • Julkaistu:
  • Julkaisutyyppi: IS
  • products.specs.pages
  • Publisher IEEE
  • Distributor IEEE
  • ICS 29.130.99
  • Tekninen komitea IEEE Power and Energy Society / Switchgear

Sidokset

  • On korvattu: IEEE C37.20.2-2022
  • On korvattu: IEEE C37.20.2-2022
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE 80005-1a-2021
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE 80005-1a-2021
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE C37.121-2020
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE C37.121-2020
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE 3004.11-2019
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE 3004.11-2019
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE C37.20.9-2019
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE C37.20.9-2019
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE C37.04-2018
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE C37.04-2018
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE C37.09-2018
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE C37.09-2018
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE 693-2018
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE 693-2018
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE C37.59-2018
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE C37.59-2018
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE C37.20.7-2017
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE C37.20.7-2017
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE C37.82-2017
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE C37.82-2017
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE C37.24-2017
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE C37.24-2017
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE C37.81-2017
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE C37.81-2017
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE C37.010-2016
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE C37.010-2016
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE 45.6-2016
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE 45.6-2016
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE C37.23-2015
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE C37.23-2015
  • Korvaa: IEEE C37.20.2-1999
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: ASTM D1654, Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments.
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: ASTM D714, Standard Test Method for Evaluating Degree of Blistering of Paints.
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: ANSI/UL 94, Tests for Flammability of Plastic Materials for Parts in Devices and Appliances.
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: ASTM B117, Standard Practice for Operating Salt Spray (Fog) Apparatus.
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: ANSI C37.55, American National Standard for Switchgear--Medium-Voltage Metal-Clad Assemblies--Conformance Test Procedures.
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: ANSI C37.54, American National Standard for Indoor AC High-Voltage Circuit Breakers Applied as Removable Elements in Metal-Enclosed Switchgear ―Conformance Test Procedures.
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: ANSI/UL 486A-486B, Wire Connectors.
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: ANSI Z535.4, American National Standard for Product Safety Signs and Labels.
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: ANSI/UL 1332, Organic Coatings for Steel Enclosures for Outdoor Use Electrical Equipment.
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: ASTM D1535, Standard Practice for Specifying Color by the Munsell System.
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: ASTM A653/A653M, Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process See all versions.
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: ASTM D229, Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation.
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: ANSI/UL 510, Polyvinyl Chloride, Polyethylene, and Rubber Insulating Tape.
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: ASTM A90/A90M, Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings.