Ostoskori (0)
Huom! Käyttökatkos 1.6.2025
Huom! Tietosuojaselostetta on taas päivitetty Lue lisää
Standardi

IEEE 400.3-2006

Kumottu

Standardista on uudempi painos: IEEE 400.3-2022

Esikatsele

Lisää mahdolliset korjaukset ja lisäykset ostoskoriin alta.

Kieli
Toimitustavat

Soveltamisala

New IEEE Standard - Inactive-Reserved. This guide covers the diagnostic testing of new or service-aged installed shielded power cable systems, which include cable, joints, and terminations, using partial discharge (PD) detection, measurement, and location. Partial discharge testing, which is a useful indicator of insulation degradation, may be carried out on-line or off-line by means of an external voltage source. This guide does not include the testing of compressed gas insulated systems or continuous on-line monitoring at normal service voltage.

Julkaisun tiedot

  • Standardi julkaisijalta IEEE
  • Julkaistu:
  • Kumottu:
  • Julkaisutyyppi: IS
  • products.specs.pages
  • Publisher IEEE
  • Distributor IEEE
  • ICS 33.120.20
  • Tekninen komitea IEEE Power and Energy Society / Insulated Conductors

Sidokset

  • On korvattu: IEEE 400.3-2022
  • On korvattu: IEEE 400.3-2022
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: IEEE 400.2-2004
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: IEEE 400-2001
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: IEEE 510-1983
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: IEC 60885-3, 1987-Electrical test methods for electric cables—Part 3: Test methods for partial discharge measurements on lengths of extruded power cables.
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: IEC 60885-3, 1987-Electrical test methods for electric cables -Part 3: Test methods for partial discharge measurements on lengths of extruded power cables
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: ICEA T-24-380-1994-Guide for Partial-Discharge Test Procedure
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: IEC 60270-High Voltage test techniques-Partial discharge measurements. 4
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: IEC 60270-High-voltage test techniques—Partial discharge measurements
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: ICEA T-24-380-1994-Guide for Partial-Discharge Test Procedure. 3
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: IEC 60885-2, 1987-Electrical test methods for electric cables-Part 2:Partial discharge tests
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: NFPA-70E-Standard for Electrical Safety Requirements for Employee Workplaces
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: NFPA-70E-Standard for Electrical Safety Requirements for Employee Workplaces. 9
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: IEC 60885-2, 1987-Electrical test methods for electric cables—Part 2: Partial discharge tests.