Ostoskori (0)
Huom! Käyttökatkos 1.6.2025
Huom! Tietosuojaselostetta on taas päivitetty Lue lisää
Standardi

IEEE 352-1987

Enums.Sd.Shared.Models.DocumentStatus.Revised

Standardista on uudempi painos: IEEE 352-2016

Esikatsele

Lisää mahdolliset korjaukset ja lisäykset ostoskoriin alta.

Kieli
Toimitustavat

Soveltamisala

Revision Standard - Superseded. The basic principles that are needed to conduct a reliability analysis of safety systems are provided for designers and operators of nuclear power plant safety systems and the concerned regulatory groups. By applying the principles given, systems may be analyzed, results may be compared with reliability objectives, and the basis for decisions may be suitably documented. The quantitative principles are applicable to the analysis of the effects of component failures on safety system reliability. Although they have their greatest value during the design phase, the principles are applicable during any phase of the systemÕs lifetime. They may also be applied during the preoperational phase or at any time during the normal lifetime of a system.

Julkaisun tiedot

  • Standardi julkaisijalta IEEE
  • Julkaistu:
  • Julkaisutyyppi: IS
  • products.specs.pages
  • Publisher IEEE
  • Distributor IEEE
  • ICS 27.120.20
  • Tekninen komitea IEEE Power and Energy Society / Nuclear Power Engineering

Sidokset

  • On korvattu: IEEE 352-2016
  • On korvattu: IEEE 352-2016
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE 497-2016
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE 497-2016
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE 379-2014
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE 379-2014
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE 933-2013
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE 933-2013
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE 933-2013
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE 308-2012
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE 577-2012
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE 497-2010
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE 603-2009
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE 379-2000
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE 379-1988
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: IEEE 500-1984
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: IEEE 603-1980
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: IEEE 577-1976
  • Korvaa: IEEE 352-1975
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: ANSI/ANS 52.1-1983, American National Standard for Nuclear Safety Criteria for the Design of Stationary Boiling Water Reactor Plants.
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: -ANSI/ANS publications can be obtained from the Sales Department, American National Standards Institute, 1430 Broadway, New York, NY 10018, or from the American Nuclear Society, 555 North Kensington Avenue, La Grange Park, IL 60525
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: ANSI/ANS 51.1-1983, American National Standard for Nuclear Safety Criteria for the Design of Stationary Pressurized Water Reactor Plants.