Ostoskori (0)
Huom! Käyttökatkos 1.6.2025
Huom! Tietosuojaselostetta on taas päivitetty Lue lisää
Standardi

IEEE 1812-2014

Kumottu

Standardista on uudempi painos: IEEE 1812-2023

Esikatsele

Lisää mahdolliset korjaukset ja lisäykset ostoskoriin alta.

Kieli
Toimitustavat

Soveltamisala

New IEEE Standard - Inactive-Reserved. Contained in this trial-use guide are instructions for conducting tests to determine the performance characteristics and machine parameters of permanent magnet (PM) machines. The tests described may be applied to motors and generators, as needed, and no attempt is made to partition this guide into clauses applying to motors and clauses applying to generators. It is not intended that this guide shall cover all possible tests, or tests of a research nature, but only those general methods that may be used to obtain the performance data and machine parameters. The schedule of factory and field tests, which may be required on new equipment, is normally specified by applicable standards or by contract specifications. This guide should not be interpreted as requiring any specific test in a given transaction or implying any guarantee as to specific performance indices or operating conditions. The term specified conditions for tests as used in this guide will be considered as rated conditions unless otherwise agreed upon. Rated conditions apply usually to the quantities listed on the machine nameplate.

Julkaisun tiedot

  • Standardi julkaisijalta IEEE
  • Julkaistu:
  • Kumottu:
  • Julkaisutyyppi: IS
  • products.specs.pages
  • Publisher IEEE
  • Distributor IEEE
  • ICS 19.080
  • ICS 29.160.30
  • Tekninen komitea IEEE Power and Energy Society / Electric Machinery

Sidokset

  • On korvattu: IEEE 1812-2023
  • On korvattu: IEEE 1812-2023
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: IEEE 43-2013
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: IEEE 43-2013
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: IEEE 43-2013
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: IEEE 115-2009
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: IEEE 433-2009
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: IEEE C57.13-2008
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: IEEE 112-2004
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: IEEE 95-2002
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: IEEE 95-2002
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: IEEE 95-2002
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: IEEE 118-1978
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: IEEE 56-1977
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: ASTM-G182, Standard Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings.
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: NEMA MG1, Motors and Generators.