Ostoskori (0)
Huom! Käyttökatkos 1.6.2025
Huom! Tietosuojaselostetta on taas päivitetty Lue lisää
Standardi

IEEE 1727-2013

Kumottu

Standardista on uudempi painos: IEEE 1727-2013

Esikatsele

Lisää mahdolliset korjaukset ja lisäykset ostoskoriin alta.

Kieli
Toimitustavat

Soveltamisala

New IEEE Standard - Inactive-Reserved. Induced voltage working procedures for underground transmission circuits are established in this guide. A transmission circuit when de-energized will have an induced voltage when in a common duct bank with an energized circuit. The induced voltage may be a possible safety hazard. The induced voltage may be determined by modeling the circuits and by measurement. This guide addresses the working procedures to follow when performing work where induced voltage is present.

Julkaisun tiedot

  • Standardi julkaisijalta IEEE
  • Julkaistu:
  • Kumottu:
  • Julkaisutyyppi: IS
  • products.specs.pages
  • Publisher IEEE
  • Distributor IEEE
  • ICS 29.240.01
  • ICS 33.040.20
  • Tekninen komitea IEEE Power and Energy Society / Insulated Conductors

Sidokset

  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE 1234-2019
  • Enums.Sd.Shared.Models.ProductRelationType.REFERRED_BY: IEEE 1234-2019
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: OSHA 29 CFR 1910.303, Subpart S—Electrical. paragraph. 303(g)(2)(i)(A) - Guarding of Live Parts
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: CSA - C22.3 #7, Canadian Standards Association Underground Systems.
  • Enums.Sd.Shared.Models.ProductRelationType.REFERS: Accredit Standards Committee C2-2007, National Electrical Safety Code® (NESC®).